Home

Radio Valves

Cossor 'Stentor 2'

  Oxide cathode output triode

Stentor 2 Stentor 2  anode

This triode was probably made in 1925, after the P1, W3, and WR1 series, and a little earlier than this Point One LF. It has a 2 volt 200 mA oxide coated filament. Max anode voltage 110. Standard British 4-pin base. The anode (at right above) is still the typical Cossor shape, however it has a flat top edge (compare with the Point One LF).

© Andy Cowley, 2005-2012     Home

This page last modified by AJC on Friday, 26-Mar-2010